Improved weighting scheme using consumer-level GNSS L5/E5a/B2a pseudorange measurements in the urban area

The accurate global navigation satellite system (GNSS) positioning in the dense urban areas is still a challenge, especially for low-cost receivers. The multipath effects and non-line-of-sight (NLOS) receptions from surrounding buildings will significantly degrade the positioning performance. Due to the increasing channel number in GNSS chip, the low-cost receiver tends to be capable of acquiring multi-frequency signals, including the new L5-band signal. Because of the higher chipping rate, the GNSS L5-band measurement is less affected by the multipath effect, whereas the measurement number is limited in the current stage. On the contrary, the availability of the conventional L1-band measurement is sufficient to achieve a good dilution of precision (DOP). Based on the complementary characteristics, a GNSS L1/L5 bands integrated positioning algorithm is developed in this study to improve the positioning performance in urban areas. A modified weighting model based on carrier-to-noise ratio and satellite elevation angle is employed to assign proper weighting between L1-band and L5-band measurements. Meanwhile, the dMP5 feature from dual-frequency measurement and the consistency check algorithm are employed to detect and exclude outliers, which are possibly NLOS receptions. Experimental results and analyses indicate that the developed DFE-CCWLS method can significantly improve the positioning accuracy, achieving the root-mean-square error less than 10 m for most of the urban scenarios.

Recommended citation: Ng, H.-F., Zhang, G., Yang, K.-Y., Yang, S.-X., & Hsu, L.-T. (2020). Improved weighting scheme using consumer-level GNSS L5/E5a/B2a pseudorange measurements in the urban area. Advances in Space Research, 66(7), 1647-1658. https://doi.org/10.1016/j.asr.2020.06.002.